Concrete Protector and Finisher – LiquiShield
LiquiShield is a water based guard formulated to improve gloss while adding substantial protection against stain and etch. It is
low odor and easy to apply requiring only two (2) coats at a rate of 3,000-4,000 sq.ft. Per gallon. This concrete protector and finisher eliminates the need for floor finish and conventional coatings by resisting scuffs, black marks, and soil. This concrete protector and finisher will not peel, flake, or discolor and its breathable formula is ideal for concrete, terrazzo and other porous stone surfaces.
Features
- Low odor and easy to apply
- Resists scuffs, black marks, and soil
- Will not peel, flake, or discolor
Directions for Use
Recommended for polished concrete and terrazzo surfaces for extended stain and etch protection. Clean entire area with
Betco DensiClean, allow floor to dry prior to application. Apply Betco LiquiShield at proper application rate, 3,000 to 4,000 sq.
ft. per gal, with a low-pressure sprayer spread with a microfiber applicator pad or mop and bucket application. Allow to dry to
touch, 45 to 60 minutes, then apply second coat using the same procedures. Allow second coat to dry 60 minutes then high
speed burnish with Betco SI Burnish Pad. Allow 1 to 2 hours cure time before floor is exposed to full traffic. Allow 24 hours
before the use of cleaners on the floor. Maintain floor with Betco Crete Rx DensiClean and Betco Crete Rx Cleaning Pads for
maximum protection and shine.
Tech Specs
Color: Opaque White
Density: 1.025-1.05
pH: 7.0-9.0
Flash Point: >100C/212F
Warranty: 1 year
Available In
4 – 1 Gal. Bottles Item#167904-00
There are no reviews yet.